Cover End Pressure [Max |
30.0 LB |
Manufacturer Part No. |
Flange Mount |
Weight |
Left Hand (CCW) |
Cover End Flow @ RPM |
V2010-1F7S6S-11CC12-LH |
Displacement Shaft End (cu in/revolution) |
1 1/2 |
Major Diameter [Min |
Flange |
Port Orientation - Shaft End |
N/A |
Displacement Cover End (cu in/revolution) |
N/A |
Model No. |
0.875 in |
Shaft End Flow @ RPM |
13 Tooth Splined |
Pressure Port Size, Cover End |
V2010 |
Shaft Seal Type |
1 5/16 in |
Integral Valve Configuration |
Buna-N |
Port Orientation - Cover End |
3000 |
Controlled Flow Rate |
0.728 in |
Shaft End Pressure [Max |
SAE B, 2 Bolt |
GPM @ 1,800 rpm, Cover End |
Single Shaft Seal |
Shaft End RPM [Max |
16/32 |
Cover End RPM [Max |
3000 |
Mounting |
3000 |
Mounting Flange |
N/A |
Pressure Port Size, Shaft End |
6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
Relief Valve Setting |
0.873 in |
Port Size |
0.872 in |
Seal Material |
0.7335 in |
Shaft Type |
0.7225 in |
Spline Description |
N/A |
Rotation |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
Shaft Length |
V2010-1F7S6S-11CC12-LH |
GPM @ 1,800 rpm, Shaft End |
2200 |
Minor Diameter |
2500 |
Minor Diameter [Min |
9 |
Max. RPM [Max |
10.5 |
Pump Series |
N/A |
Shaft Key |
Outlet 45° CW from Inlet |
Pilot Type |
Outlet Inline w/Inlet |
Major Diameter [Max |
1/2 in SAE O-Ring |
Port Type |
3/4 in SAE O-Ring |
Shaft Dia. |
1.19 |
Minor Diameter [Max |
1.39 |