Manufacturer Part No. |
3/16 in |
Relief Valve Setting |
Standard Blue Paint |
Rotation |
Axial Piston Pumps |
Shaft Length |
PVM018 |
Displacement Shaft End (cu in/revolution) |
17.2 LB |
Minor Diameter [Min |
Right |
Pilot Type |
PVM018ER02AE01AAA28000000A0A |
Shaft End Pressure [Max |
Tube Ports, SAE Threaded Ports |
Port Orientation - Shaft End |
Open Circuit Axial |
Shaft Seal Type |
1800 rpm |
Pressure Port Size, Shaft End |
4.5 gpm @ 1000 rpm, 5.5 gpm @ 1200 rpm, 7 gpm @ 1500 rpm, 8.2 gpm @ 1800 rpm |
Pressure Port Size, Cover End |
1.625-12 UN-2B SAE O-Ring |
Cover End Flow @ RPM |
0.75 in |
Port Orientation - Cover End |
3/4 |
Shaft Key |
Straight Keyed |
Weight |
PVM Series Industrial Piston Pump |
Model No. |
8.2 gpm @ 1750 rpm |
Mounting Flange |
1.0625-12 UN-2B SAE O-Ring |
Cover End RPM [Max |
Electric Motor Speeds |
Pump Series |
Pressure Compensator |
Port Type |
1.26 in |
Integral Valve Configuration |
End |
Major Diameter [Min |
Buna-N |
Port Size |
3.25 in |
Minor Diameter |
8.2 |
Shaft Dia. |
SAE A, 2-Bolt |
Controlled Flow Rate |
4 3/16 in |
Spline Description |
Adjustable Maximum Displacement Stop & Single Shaft Seal |
Cover End Pressure [Max |
SAE 19-1 |
Shaft End RPM [Max |
918 |
Shaft Type |
N/A |
Max. RPM [Max |
5000 |
Displacement Cover End (cu in/revolution) |
22 hp |
Seal Material |
PVM018ER02AE01AAA28000000A0A |
Major Diameter [Max |
Single Pump, Non-Thru-Drive |
Mounting |
1.1 |
GPM @ 1,800 rpm, Shaft End |
62 |
Shaft End Flow @ RPM |
None |
Minor Diameter [Max |
5000 psi |
GPM @ 1,800 rpm, Cover End |
4568 |
Intermittent Pressure [Max |
4600 |
Pressure Compensator Setting |
280 Bar |